Rhino Coffee Gear’s new pitcher rinser design brings with it a number of features you have been asking for!
Better Drainage the 3 piece drain tray has an improved design to ensure there is no static build-up of residue along with a generous drain outlet.
Bigger Vessels the large actuator plate makes it useful across a broader range of equipment.
Optional Spinjet Spray Mechanism, the new spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.
Install Parts included with each rinser you will find some fittings and hoses to make installation easier ( 3/8 push fit inlet plus elbow option, 1 metre of inlet hose and drain hose with clip). It is recommended a Pressure limiting valve (PLV) is used when installing on mains water line.
NSF Certified All Rhino Milk Pitcher Rinsers are NSF Certified
Dimensions (approx): Width – 238mm x Length – 600mm
Please note: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into bench top surfaces. Bombora does not take responsibility for installation cut out error and provides the sizes and dimensions as a layout guide only.
Watch how to swap the plug and spray mechanisms.
Watch how to connect the drain tray and hoses:
Watch how to fix the o-ring to the activation piston:
Watch how to change the piston.
Watch how to replace the piston seals